ARS SAM5 5.56 AK-133S RH FLASH HIDER AK-74 30RD

Arsenal SAM5 5.56x45mm (.223 REM) AK-47 rifle with AK-74 type Front Sight Block and AK-133S Flash Hider milled and forged receiver 16.3 chrome lined hammer forged barrel 24×1.5mm right-hand threads FIME Enhanced Fire Control Group black polymer furniture intermediate length buttstock scope rail and one 30-round M-74N Circle 10 magazine. – This is the civilian semi-auto version of the Arsenal Bulgarian made AR-M1 select fire rifle. – Features 100% new-production parts and components. Bulgarian hot-die hammer forged receiver bolt and bolt carrier. Cold hammer-forged 16.3 barrel from Arsenal’s Bulgarian factory built on Steyr manufacturing technology hard-chrome plated bore and chamber. The AK-74 type front sight block has 24×1.5mm right-hand threads with the AK-133S flash hider installed. Includes AK scope rail Intermediate length US-made 10 trapdoor buttstock (total length of pull 13.4.) 922(r) compliant with US or imported magazines. Substantially extended service life over other types of assemblies. Installed on this rifle is the Enhanced Fire Control Group from FIME the AK enthusiasts favorite. – Arsenal’s SAM5 receiver is milled from a hot-die hammer forged receiver blank by the Arsenal Co. of Bulgaria. Other milled-receiver AKs are machined from bar stock but Arsenal’s hot-die hammer forging produces stronger and finer-grained steel. Internal voids and cooling deformations are eliminated by the 5-ton hammer forging process. – The forged receiver blank requires over 5.5 hours of milling before assembly. This forging and milling process is complex and time-intensive but Arsenal’s meticulous attention to detail delivers a receiver of unequalled strength precision and durability. – Includes FIME Group Enhanced Fire Control Group – Includes FM-922EUS the Enhanced Fire Control Group (FCG) for AK- and RPK-based rifles. FIME’s Enhanced FCG includes a single-hook trigger hammer disconnector disconnector springs. – FIME’s Enhanced Fire Control Group delivers shortened trigger travel with an extremely smooth and light trigger pull. To prevent lever misfires the disconnector face makes full contact with the hammer. Further the disconnector is engineered with an elongated tail which makes a full stop on the rear trigger guard rivet and the hammer stop prevents the hammer from slamming on the trigger. With these two designs functioning together it eliminates the trigger slap found in competing products. – Features: – AK-74 type Front Sight Block – AK-133S Flash Hider – 5.56x45mm Bulgarian hot-die hammer forged receiver bolt and bolt carrier – Steyr technology cold hammer-forged 16.3 barrel from the Arsenal Bulgarian factory – 24×1.5mm right-hand threads – Hard-chrome plated bore and chamber – FIME Group Enhanced FCG – Intermediate length US-made 10 black polymer buttstock with cleaning kit compartment. (Total length of pull 13.4) – 922(r) compliant with US or imported magazines – Side-attached scope rail – 30-round 5.56x45mm Circle 10 magazine – Caliber: 5.56 x 45 mm (.223) – Total length: 36.5 in. (927 mm) – Barrel length: 16.3 in. (415 mm) – Rifling: 6 grooves – Twist rate: 1:7 (1 in 178 mm) – Muzzle velocity: 2986 fps (910 m/s) – Effective range: 547 yds (500 m) – Maximum range: 1476 yds (1350 m) – Rear sight range: 875 yds (800 m) – Rate of Fire: 40 rds/min (practical) – Receiver Milled Receiver – Fire Control FIME Enhanced Trigger – Finish Black – Front Flash Hider – Magazine 30 Round – Threads 24×1.5mm RH